Floor Tiles Cutting Use an Angle Grinder |
Posted: August 29, 2017 |
When making cuts on floor tiles using a corner grinder and a diamond blade, this is where the hard part comes into play. Not only is the hand tool that is more difficult to control to make straight lines, but also has to gradually reduce the tiles from the reverse bottom. When you mark your tiles to pieces, you really have to reflect the measurements to get the correct dimensions for the top position, and this can be a somewhat confusing look at the best of times. If you want to more about a angle grinder then you go lawn care pal you get more information. Once happy with the desired marks, then follow your lines with a slightly noticeable cut, pass through the same place, maybe about 4 to 5 times until only enamel, and never directly through it once. If you try this, you may end up breaking the floor tiles in no time, so the trick to cut with the angle grinder is with a massive smoother smooth, never along the way. To facilitate the control to suit your preference, you can hold the main body of the angle grinder with one hand, with the other hand, holding the optional handle which leaves left or right. This method will give you a more precise and rigid cutting control that is perfect for straight lines. As for the round lines, with both hands on the main body you can achieve more free flowing work ideal for circular surveys. You can also rotate the protector that protects your hands from the blade to suit your choice from the cutting angle, but whatever you do, do not remove it from the grinder. It is there for the purpose if your personal protection is valued more than others. If you have a circular pattern to remove from the tile, do it in phases as with wet tile saw in making "comb teeth" after the main cutting line. Once you have a series of "teeth" from 1/4 "to 1/2" wide along your cut line from the back, but not quite along the way to the enamel, then you can easily cut these off with any of your criteria or Flaps or pliers, clean the sharp edges as you go. As always, safety first, so never forget to wear protect your eye, even when you are skirting tile. These fragments can be broken like bullets. As an ideal way to practice to get a hang of these techniques before applying them to your business, it is always advisable to get a little experience first to create your comfort zone. Using off - cuts or breaking ground tiles behind the save, first get some workout in how to cut tiles using a corner grinder. You can never be too careful when trying something new, and the last thing you want is an unnecessary waste and an increase in the budget expenses of your floor tile project. Matt took nearly 3 years to perfect his book "A Unique Step by Step Guide: Making the Earth Easier". I wanted to be as accessible as possible to people with varying degrees of experience. From the first novice to the veteran who has been assembled for years, this book covers everything you need to learn more about the land, with many short cuts and pro tips that make the job faster and easier.
|
||||||||||||||
|